Trigger Kit Curved 5lb Drop In
Our Price
$158.00
Item# 00457 | In StockShips immediately for $18 Flat Rate. Combine with other flat rate items for the same low price.
(0) Reviews
PATRIOT ORDNANCE FACTORY Drop-In AR-15/AR-10
Patriot Ordnance Factory 00457 Trigger System Drop-In AR-15/AR-10 Single Stage Steel w/Aluminum Housing Standard
This single-stage, non-adjustable, drop-in trigger boasts a solid 4.5 lb.
pull weight and is pre-assembled in a Hardcoat Anodized aluminum housing
complete with rubber urethane feet for immediate competition, hunting, and
tactical applications right out of the box. Carved from American A2 steel,
the Trigger, Disconnect, and Hammer are all Nitride Heat Treated to 70
Rockwell case hardness for ultimate strength and corrosion resistance.
Includes custom-fit stainless steel KNS Precision Anti-Walk Pins for both
standard AR and POF USA ambidextrous lower receivers. Just pull your rear
take down pin out and two trigger pins. Remove your factory AR trigger
parts and drop this complete system in and install pins. Within minutes
your AR is operational again.
NOTE: This curved trigger does not work with DPMS 308 lowers that have
straight trigger guards, or with Sig 716 lowers.
SPECIFICATIONS:
Mfg Item Num: 00457
Category: FIREARM PARTS
Type :Single Stage Trigger
Model :AR Style
Dimensions :Standard
Size :AR-15/M16/M4
Material :Steel w/Aluminum Housing
Action :
Trigger :Single Stage
Safety :
Thread Pattern :
Finish :Black/Red
Bolt Type :
Hand :Ambidextrous
Hammer Type :
Max Capacity :
UPC# 847313004574
Patriot Ordnance Factory 00457 Trigger System Drop-In AR-15/AR-10 Single Stage Steel w/Aluminum Housing Standard
This single-stage, non-adjustable, drop-in trigger boasts a solid 4.5 lb.
pull weight and is pre-assembled in a Hardcoat Anodized aluminum housing
complete with rubber urethane feet for immediate competition, hunting, and
tactical applications right out of the box. Carved from American A2 steel,
the Trigger, Disconnect, and Hammer are all Nitride Heat Treated to 70
Rockwell case hardness for ultimate strength and corrosion resistance.
Includes custom-fit stainless steel KNS Precision Anti-Walk Pins for both
standard AR and POF USA ambidextrous lower receivers. Just pull your rear
take down pin out and two trigger pins. Remove your factory AR trigger
parts and drop this complete system in and install pins. Within minutes
your AR is operational again.
NOTE: This curved trigger does not work with DPMS 308 lowers that have
straight trigger guards, or with Sig 716 lowers.
SPECIFICATIONS:
Mfg Item Num: 00457
Category: FIREARM PARTS
Type :Single Stage Trigger
Model :AR Style
Dimensions :Standard
Size :AR-15/M16/M4
Material :Steel w/Aluminum Housing
Action :
Trigger :Single Stage
Safety :
Thread Pattern :
Finish :Black/Red
Bolt Type :
Hand :Ambidextrous
Hammer Type :
Max Capacity :
UPC# 847313004574
| Type | Trigger |
| Model | Drop-In |
| Dimensions | Standard |
| Size | AR-15/M16/M4 |
| Material | Steel w/Aluminum Housing |
| Action | |
| Trigger | Single Stage |
| Safety | |
| Thread Pattern | |
| Finish | Black/Red |
| Bolt Type | |
| Hand | Ambidextrous |
| Hammer Type | |
| Max Capacity |
Due to shipping regulations, all ammunition ordered through our website must be signed for upon delivery by an adult 21 years of age or older. If you wish to order ammunition via our website and choose the in store pick up option, you may pick up your order at either one of our locations. Federal ammunition laws apply on pick up. You must be 21 years of age to purchase handgun ammunition or at least 18 for rifle/shotgun ammunition. To choose this option, click on the in store pick up tab. Age will be verified upon pick up.
Magazines and miscellaneous items can be shipped directly to your home. Both the stores and the warehouse will choose the carrier that best suits prompt delivery.
All firearms must be sent to a Federally Licensed Firearms dealer. There are zero exceptions. It is your responsibility to secure a FFL dealer in your area that will receive your firearm. You must submit a valid copy of that FFL to us by email or fax.
Illinois residents must provide a copy of their FOID card prior to any ammunition/fireman purchase.
IMPORTANT: YOU ARE RESPONSIBLE FOR KNOWING YOUR STATE LAWS. If you live in a heavily regulated state you may only purchase merchandise legally owned in your state. If we discover that you have purchased an illegal item based on your state regulations there will be penalties. We will charge a 15% fee for restocking, prepackaging and credit card fees based on the purchase price.
When in doubt please email or call us. Ask for the web sales team. We want to help!
Please contact us for any questions on availability. This website shows in stock items only. If you can no longer find an item displayed then, it is no longer available. There will be some variance between actual quantities on hand as changes on this site are not instant. Additional specific information can be found under the shipping policy tab at the bottom of the page.
Cart( 0 )
Login
