Ruger Auto Red Dot Mount Mk1/2/3/4 P85/P90
Our Price
$54.99
Item# 49321 | In StockShips immediately for $18 Flat Rate. Combine with other flat rate items for the same low price.
(0) Reviews
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811`
Overall Width: .99`
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (2) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*
*All ADE mounts require 6-32 x 3/8` screws.
Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64`` allen wrench for installation.
Modification of your firearm may nullify the manufacturer`s warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Coating: Matte Black Hardcoat
Overall Length: 1.811`
Overall Width: .99`
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (2) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*
*All ADE mounts require 6-32 x 3/8` screws.
Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64`` allen wrench for installation.
Modification of your firearm may nullify the manufacturer`s warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Due to shipping regulations, all ammunition ordered through our website must be signed for upon delivery by an adult 21 years of age or older. If you wish to order ammunition via our website and choose the in store pick up option, you may pick up your order at either one of our locations. Federal ammunition laws apply on pick up. You must be 21 years of age to purchase handgun ammunition or at least 18 for rifle/shotgun ammunition. To choose this option, click on the in store pick up tab. Age will be verified upon pick up.
Magazines and miscellaneous items can be shipped directly to your home. Both the stores and the warehouse will choose the carrier that best suits prompt delivery.
All firearms must be sent to a Federally Licensed Firearms dealer. There are zero exceptions. It is your responsibility to secure a FFL dealer in your area that will receive your firearm. You must submit a valid copy of that FFL to us by email or fax.
Illinois residents must provide a copy of their FOID card prior to any ammunition/fireman purchase.
IMPORTANT: YOU ARE RESPONSIBLE FOR KNOWING YOUR STATE LAWS. If you live in a heavily regulated state you may only purchase merchandise legally owned in your state. If we discover that you have purchased an illegal item based on your state regulations there will be penalties. We will charge a 15% fee for restocking, prepackaging and credit card fees based on the purchase price.
When in doubt please email or call us. Ask for the web sales team. We want to help!
Please contact us for any questions on availability. This website shows in stock items only. If you can no longer find an item displayed then, it is no longer available. There will be some variance between actual quantities on hand as changes on this site are not instant. Additional specific information can be found under the shipping policy tab at the bottom of the page.
Cart( 0 )
Login
