HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
This is a press fit mount. Utilization of a sight pusher tool may be required.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment:
- Viridian RFX25
- Vortex Viper
- Vortex Venom
- Burris FastFire
- Burris FastFire 2
- Burris FastFire 3
- Burris FastFire 4
- Docter
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
- Cuda RX-795
This Evolution Gun Works - EGW Springfield XD Red Dot Mount:
- Springfield XD® MOD.2® – 3" SUB-COMPACT MODEL
- Springfield XD® MOD.2® – 3.3" SUB-COMPACT MODEL
- Springfield XD® MOD.2® – 4" SERVICE MODEL
- Springfield XD® MOD.2® – 4" SERVICE MODEL THREADED BARREL
- Springfield XD® MOD.2® – 5" TACTICAL MODEL
- Springfield XD® 3" SUB-COMPACT MODEL
- Springfield XD® 4" SERVICE MODEL
- Springfield XD(M)® 3.8" COMPACT MODEL
- Springfield XD(M)® 3.8" MODEL
- Springfield XD(M)® 4.5" MODEL
- Springfield XD(M)® 4.5" THREADED BARREL MODEL
- Springfield XD-S® 3.3" MODEL
- Springfield XD-E™ 3.3" SINGLE STACK
- Springfield XD-E™ 3.8" SINGLE STACK
- Springfield XD-E™ 3.8" SINGLE STACK
- Springfield Hellcat (NON OSP - NOT OPTIC READY)
Does not fit:
- Springfield XD(M)® 5.25" COMPETITION SERIES MODEL
- Any Optics Ready Springfield XD
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
| MANUFACTURER | EGW |