The Hornady Stuck Case Remover (050033) is a complete multi-caliber tool kit designed to extract cases stuck inside standard sizer dies without damaging the die, giving reloaders a reliable, step-by-step mechanical solution to one of the most frustrating problems encountered at the reloading bench.
Key Features
- Part Number: 050033
- UPC: 090255500332
- Type: Stuck case removal tool kit
- Caliber Compatibility: Multi-caliber, works with all standard sizer die diameters
- Kit Contents: Remover body, hardened washer, socket head cap screw, number 7 drill bit, and 1/4x20 tap
- Allen Wrench Required: 3/16 inch hex wrench, not included
- Material: Steel
- Finish: Silver
- Country of Manufacture: USA
Special Features
- The drill, tap, and mechanical extraction method works on the case head rather than the die body, applying all extraction force directly to the stuck case so the die threads, interior surfaces, and sizing ring are never stressed, scored, or damaged during removal
- The cupped remover body seats squarely over the end of the die and distributes extraction pressure evenly across the die face, preventing the rocking or canting that would occur if force were applied off-center through the case head alone
- The included number 7 drill bit and 1/4x20 tap are precision-matched to the socket head cap screw dimensions, ensuring the tapped threads in the case head engage cleanly and provide enough mechanical advantage to break even a severely stuck case free with normal hand-tool effort
Practical Benefits
- The 050033 kit covers the complete extraction procedure from start to finish with a single purchase, requiring only a drill, vise, and a 3/16 inch hex wrench that most reloaders already have on the bench
- The mechanical advantage provided by threading the cap screw into the tapped case head and pulling against the remover body generates far more extraction force than any manual prying or pulling method, making it effective on cases stuck by excess lube buildup, case head expansion, or dry sizing without lubricant
- Keeping the Hornady Stuck Case Remover (050033) on the bench eliminates the risk of destroying a sizing die trying to improvise a removal solution, protecting a die investment that typically costs several times more than this tool
The Hornady Stuck Case Remover (050033) is a practical choice for any reloader who wants a complete, purpose-built solution for extracting stuck cases from sizer dies safely and without die damage across all standard rifle and pistol calibers.
| MANUFACTURER | HORNADY |