The Hornady Cam Lock Bullet Puller (050095) is a press-mounted collet-style bullet puller that threads into any standard 7/8x14 reloading press die station, allowing reloaders to quickly and cleanly disassemble rifle cartridges by clamping the bullet with a caliber-specific collet and pulling it free with a single press stroke.
Key Features
- Part Number: 050095
- UPC: 090255500950
- Type: Press-mounted cam lock collet bullet puller
- Color: Red and black
- Material: Steel body with cast metal cam lock handle
- Weight: 7.2 oz
- Dimensions: 6.875 x 1.25 x 1.25 inches
- Thread: Standard 7/8x14, fits all standard single-stage and turret reloading presses
- Collets: Sold separately, 14 collets available covering .172 through .458 caliber
- Intended Use: Rifle cartridges only, not recommended for pistol cartridges
- Warranty: Lifetime
- Country of Manufacture: USA
Special Features
- The cam lock handle mechanism clamps the collet firmly around the bullet with a simple downward lever motion, providing a controlled, repeatable grip on the bullet without marring the bullet surface, allowing pulled bullets to be reused in future loads
- Threading into a standard 7/8x14 die station means the bullet puller installs and adjusts exactly like a sizing or seating die, using the press ram to push the cartridge into the collet and extract the bullet cleanly in a single controlled stroke rather than the repeated impact method used by kinetic pullers
- A full range of 14 caliber-specific collets covering .172 through .458 diameter lets reloaders build a complete multi-caliber pulling capability by adding only the collets needed for their specific cartridges, avoiding the cost of a separate puller for each caliber
Practical Benefits
- The press-mounted cam lock method is significantly faster and more consistent than a kinetic mallet-style puller for high-volume disassembly work, making the 050095 the practical choice for reloaders pulling down factory ammunition, correcting seating depth errors, or recovering components from a large batch of loaded rounds
- Pulling bullets with the collet system keeps powder and primer intact in most cases, allowing powder to be recovered cleanly and reused rather than scattered across the bench as happens with kinetic pullers
- The lifetime Hornady warranty covers the tool body and handle for the life of the reloader, making this a one-time purchase that will outlast the reloading bench it sits on
The Hornady Cam Lock Bullet Puller (050095) is a proven platform for any serious rifle reloader who wants the fastest, cleanest method for disassembling rifle cartridges at the press with full component recovery and caliber flexibility through interchangeable collets.
| MANUFACTURER | HORNADY |