HORNADY B65X55 6.5X55 SWEDISH LOCK-N-LOAD MODIFIED CASE

The Hornady Lock-N-Load Modified Case 6.5x55 Swedish (B65X55) is a brass tool case for reloaders who use Hornady Lock-N-Load O.A.L. and Precision Gauges to set exact bullet seating depth in 6.5x55 rifles. This B65X55 modified case for 6.5x55 Swedish Mauser lets you match cartridge overall length to your rifle’s chamber instead of relying only on manual data.

Key Features

• Manufacturer part number: B65X55
• Cartridge: 6.5x55 Swedish / 6.5x55 SE
• Case family: Hornady Lock-N-Load Modified Case B Series
• Intended use: for use with Hornady Lock-N-Load O.A.L. and Precision Gauges
• Material: brass modified case
• Case body: manufactured to 6.5x55 chamber dimensions within SAAMI spec range
• Neck: neck approximately 0.002 inch oversize to accept the same bullets you intend to load
• Case head: fine threaded case head to attach directly to Lock-N-Load gauges and keep the case square in the chamber
• Quantity: one modified case per package

Special Features

• The B65X55 modified case uses a fine threaded case head so it screws securely into Lock-N-Load O.A.L. and Precision Gauges and stays aligned while you move the bullet forward to touch the rifling.
• The slightly oversize neck lets a 6.5mm bullet slip into the case mouth easily while remaining concentric, which supports smooth and repeatable overall length checks.
• Chamber-realistic construction gives you a more accurate seating-depth reference than generic test bodies or improvised cases.
• As a B Series modified case, the B65X55 can be swapped with other B Series cases on the same Hornady gauge body to cover multiple calibers.

Practical Benefits

• The Hornady Lock-N-Load Modified Case 6.5x55 Swedish (B65X55) gives you a repeatable way to find the cartridge length that fits your rifle’s throat so you can tune seating depth for accuracy rather than guessing from book lengths.
• Because the B65X55 case works with straight and curved Hornady gauges, it fits many 6.5x55 Mauser, sporter, and modern rifles that accept the tool and lets you standardize your seating-depth process across more than one gun.
• The brass construction and oversize neck let you use the same bullets you plan to load, so the distance to the lands you measure transfers cleanly to your seating die setup on the bench.